How to Enable Secure Boot in UEFI BIOS

How to enable secure boot in bios asus when you first install Windows, it will be difficult to install in the UEFI mode because of the way that it requires you to have a partition table that supports UEFI. So, in order to prevent Windows from crashing while you’re installing the operating system, you have to make sure that you enable UEFI security in the BIOS. This is a simple process that you can perform with the command line or with a third-party application.

Usually, ASUS motherboards have UEFI BIOS which allows you to configure dual-booting. However, it is possible to disable this feature so that you can install Windows and set up a dual-boot setup. Most motherboards don’t have a direct option to enable or disable Secure Boot. To disable this feature, you must clear the Secure Boot keys from BIOS. Fortunately, it won’t void the warranty Google.

Most ASUS motherboards have UEFI BIOS. You should disable Secure Boot mode if you are planning to install Windows or set up dual-boot. Some of these models aren’t designed to support dual-booting, so you need to make sure that the system you’re purchasing supports it. You can also try a different hard drive to disable Secure Boot mode. If you don’t need Windows, you can use a partition manager.

How To Secure Boot Option In Boot Section:

1. Secure Boot is a feature of UEFI BIOS that helps prevent unauthorized operating systems, drivers, and malware from loading during the boot process. It is an important security feature that can protect your computer from various types of attacks. Here are the steps to enable Secure Boot in UEFI BIOS:

   1. Check if your computer supports Secure Boot Not all computers support Secure Boot. To check if your computer supports Secure Boot, go to the system information section of the Windows settings. You can access the settings by clicking on the Start menu and selecting “Settings”. In the settings window, click on “System” and then “About”. Under the “Device specifications” section, look for the “Secure Boot State” information. If it says “On”, then your computer supports Secure Boot.
   2. Access the UEFI settings To enable Secure Boot, you need to access the UEFI settings. The method to access the UEFI settings varies depending on the computer manufacturer and model. However, most computers allow you to access the UEFI settings by pressing a specific key during startup. The key to access the UEFI settings is usually displayed on the startup screen. Common keys include F2, F10, F12, or Del.
   3. Enable Secure Boot Once you have accessed the UEFI settings, look for the option to enable Secure Boot. The option may be called “Secure Boot”, “Boot Security”, or something similar. Enable Secure Boot and save the changes.
   4. Install a trusted operating system Secure Boot only allows trusted operating systems to load during the boot process. A trusted operating system is one that has been signed by a trusted certificate authority. To take advantage of Secure Boot, you need to install a trusted operating system. Windows 10 is a trusted operating system and it is signed by Microsoft. If you are installing Windows 10, you do not need to do anything else. If you are installing a different operating system, you need to make sure that it is signed by a trusted certificate authority.
      

      steps to enable Secure Boot in UEFI BIOS

   5. Install trusted drivers Secure Boot also prevents unsigned drivers from loading during the boot process. To avoid any driver-related issues during the boot process, you need to make sure that all your drivers are signed by a trusted certificate authority. You can check the signature of your drivers by right-clicking on the driver file, selecting “Properties”, and then clicking on the “Digital Signatures” tab. If the driver is signed by a trusted certificate authority, you will see a green checkmark.
   6. Enable Secure Boot in Windows 10 After enabling Secure Boot in UEFI BIOS, you can also enable Secure Boot in Windows 10. Here are the steps to enable Secure Boot in Windows 10:

   7. Click on the Start menu and select “Settings”.

   8. In the settings window, click on “Update & Security”.
   9. Click on “Recovery” and then click on the “Restart now” button under “Advanced startup”.
   10. Your computer will restart and display the “Choose an option” screen. Click on “Troubleshoot” and then click on “Advanced options”.
   11. Click on “UEFI Firmware Settings” and then click on the “Restart” button.
   12. Your computer will restart and display the UEFI settings.
   13. Look for the option to enable Secure Boot and enable it.
   14. Save the changes and exit the UEFI settings.
   15. Verify Secure Boot After enabling Secure Boot, you can verify that it is working properly. To verify Secure Boot, you need to check the boot logs. Here are the steps to check the boot logs:

   • Press the Windows key + R to open the Run dialog box.
   • Type “eventvwr” and press Enter to open the Event Viewer.
   • In the Event Viewer window, expand the “Windows Logs” folder and select